Erik - Corsa B X20XE

[Erik]

Piekny profi projekt!!!
Szacunek-Respect! I'm impressed!!!

Thanx

You're fit the poli bushes - it's the suspension ,or driving much harder or tough!? I heard that if I fit this poli stuff that the car-body can hurts becuse they are so hard!!!? It's that true!?

There are some different fabricants.
Friends made them for sprints from nylon, very hard, for 1/4 mile races good, but not for road use.

I have Polyurethan, but they are not all the same, some are harder.

Mine are from Powerflex, and they are not super hard. They are good for extreme road use!
I did not notice the difference very much, because I mounted the KW variant 3 coilovers at the same moment, so the Corsa was totally different.
But with 2 liter engine, I would say, put them on!!! Much better then original!

Have you some photos of build rear disc's brakes???
I got complete new parts from Vectra A GT (rear disc brakes) and i have to fit it into my corsa. I've You have some photos or some helps than please share I will be thankfull!!!

I have drawing and .dxf-file from the metal that you must weld to the Corsa axis. I am going to mount Zafira brakes, these have handbrake in the caliper. Vectra GT has handbrake in the disc. But is not very different.

Maybe this can be helpfull: http://oege.ie.hva.nl/~jelsma02/discconversion.pdf

If you have any questions, just ask

[klari]

Thanks,!!!!if have also some questions that just ask!!
Ok i have go to work!!:/

[Erik]

Trosku aktualisace...

Kola na sprinty: 15" a 8.5J


Nova kliku:




V bloku:


Pisty. Nove od JE: http://www.jepistons.com/


Upraveni pro ventily:


A spodek skoro hotove:


Hlava:


A s Anglie Jenvey Throttle Body's: http://www.jenvey.co.uk/
Zaroven me prislo DTA, stavitelnou ECU. http://www.dtafast.co.uk/

[Erik]

Nikomu nic nerikejte ale!

Tohle bude prekvapko na spinty

[mikro]

Fakt blázen

[suby]

Eriku, ty jsi vážně šílený.

[Berry]

Tak fakt klobouk dolu, Eriku rekni ake je tve povolani jakou mas profesy? Ty jsi fakt borec, no jinka ty kola na sprinty toje pecka

[Erik]

Studuju technickou visokou. Odbor automobilku...

Jinak makam na brigade jak blbec, ale to se musis umet vyridit dobrou haha
Jinak moc kseftuju s dylama...

Prave jsem zbiral dily na nove motor asi uz 2 roky, tech dilu jsem tedka prodaval, a toho je hodne haha, 1 motor komplet, 1 dalsi motor, atd atd, + to co by me to stalo, zpravit ten co se mi tedka rozbilo, skoro vijde na stejno, postavit neco uplne sileneho

[pepex]

Eriku,...
!
!
!

[Erik]

Dnes jsem prodal jeden 2 liter co jsem mel doma, a dve prevodovky.
Zitra sperra a ostre vacky, chip atd...

A budeme mit zase penecky na zbytek projectu

[MiniMike]

Erik vydelava jen na auto

ale jinak mooooc pekny

[klari]

Erik: you have c20xe!?

In this photo:

is a shaft with wheel (witch is marked on red) with 4 holes... !?
Original wheel from c20xe is diffrent and got 6 holes and the screw for thight this together is on torx key.
Did you have shaft from x20xev!?? couse this is strange..

One thing that I can say is:
GO GO GO!!
Good work!!!

[Dub.-]

hh no mazec uplně, tomu říkám ,,zapálený automechanik" =D krásný prostě

[mikro]

hh no mazec uplně, tomu říkám ,,zapálený automechanik" =D krásný prostě

To není zapálený automechanik. To je prostě Erik

[epona]

tak jako vážně smekám. Corsička je úžasná a motorově nemluvě, to jen tiše závidím..fakt jsi šikovnej